CN
EN
Rail fastening systems, screw spikes, rail joints supplier for Haoji Railway
Dec 27, 2023
The three concession stations of Panchun, Sankou and Kuama, are located on the single-line section from Yueyang to Ji'an of the Haoji Railway. The Yueyang to Ji'an section is located in Hunan and Jiangxi provinces. It is the end of the coal transportation channel of the Haoji Railway. The line starts from Pingtian Station in Yueyang District, passes through Yueyang City, Liuyang City, Yichun City, Xinyu City, Ji'an City, and ends at Ji'an Station of the Beijing-Kowloon Railway. . The total length of the main line from Pingtian Station (excluding Pingtian Station) to Ji'an Station is 433km. There are currently 29 stations (excluding Pingtian and Ji'an), 1 line station, and 7 open stations are reserved (including 3 stations under this construction). Station), 1 line location.
This project will insert and lay 2 sets of switches on the main lines of the three reserved stations of Panchun, Sankou and Kuama of the Haoji Railway. An additional arrival and departure line will be added on the right side of the line. It will also support the construction of four power stations, water supply stations and other post-station equipment and facilities. .
In 2023, Anyang Railway Equipment Co., Ltd(AT) provided rail fastening systems, screw spikes, rail joints and other railway fastening products to the reconstruction project of Panchun, Sankou and Quama stations on the Haoji Railway.
This project will insert and lay 2 sets of switches on the main lines of the three reserved stations of Panchun, Sankou and Kuama of the Haoji Railway. An additional arrival and departure line will be added on the right side of the line. It will also support the construction of four power stations, water supply stations and other post-station equipment and facilities. .
In 2023, Anyang Railway Equipment Co., Ltd(AT) provided rail fastening systems, screw spikes, rail joints and other railway fastening products to the reconstruction project of Panchun, Sankou and Quama stations on the Haoji Railway.
| No. | Product | Specification | Unit | Qty in Demand |
| 1 | ||||
| 1 | Spindle | 550kg/m seamed wheel rail assembly, including long bolts, nuts, insulating gaskets and other accessories | Set | 4 |
| 2 | Rail Joints (for non-insulated parts) | P50kg/m seamed wheel rail, complete set of components including bolts, nuts, washers and joint bar | Set | 42 |
| 3 | Rail Joints (end insulation part, wheel rail joint bar) | P50kg/m seamed wheel rail, complete set of components including bolts, nuts, washers and joint bar | Set | 4 |
| 4 | Screw spike | Equipped with 2.6m long type IIIa concrete sleepers, P60 rail (arrival and departure line) + P50 rail (bridge sleeper wheel rail) | Pcs | 26440 |
| 5 | Type II fastening systems | It is used with 60kg/m (seamless line) rails and 2.6m long Type IIIa concrete sleepers (excluding wheel rails), a complete set (including backing plates, baffles, rail clips, spring washers, nuts, etc.) | Set | 11660 |
| 6 | Type II fastening systems(insulation type) | Existing main line glued insulated joints, complete set (including pads, guide plates, elastic clips, spring washers, nuts, etc.) | Set | 150 |
| 7 | Special fastening systems for wheel rails | Used with 50kg/m wheel guard rails, complete set (tie plate, guide plate, double-coil spring washer, nut, etc.) | Set | 1566 |